engine oil BMW Z4 COUPE 2007 E86 Service and warranty information

Table of Contents
Page
The BMW Maintenance Program - 2007 BMW Z4 Roadster 3.0i, 3.0si and
Z4 Coupe 3.0si . ................................................. 1
Coverage ......................................................1
Maintenance Intervals..............................................1
Exclusions from coverage...........................................1
Maintenance Upgrade Option.........................................1
Maintenance Program.............................................. 2
Quality Certification I.............................................. 4
Unscheduled Maintenance.......................................... 4
Special Note.................................................... 4
Engine Oil Service................................................ 5
Engine Compartment..............................................5
Inspection I ..................................................... 6
Undercarriage...................................................6
Engine Compartment..............................................6
Body/Electrical...................................................7
Final Inspection..................................................7
Inspection II ..................................................... 8
Engine Compartment..............................................8
Brake Fluid Service................................................8
Oxygen Sensor Service.............................................8
Spark Plug Service................................................8
Automatic Transmission Service.......................................8
BMW Engine Oil Service stamps......................................10
Emission Control Maintenance Schedule BMW Z4 Roadster 3.0i, 3.0si and
Coupe 3.0si................................................... 13
BatteryCare .................................................... 14
Corrosion Protection............................................. 14
Restoring corrosion protection.......................................14
Underbody maintenance...........................................14
Body Inspection — Z4 Roadster 3.0i, 3.0si . ............................. 15
Body Inspection — Z4 Coupe 3.0si . . .................................. 21
Customer Assistance Information.................................... 27
Customer Assistance - Notification ................................... 28
BBB AUTO LINE................................................. 28
California Residents..............................................29
Special Programs................................................ 30
BMW Import Processing Centers..................................... 30

Maintenance Program
The BMW Maintenance Program has been
devised with the following objectives: to maxi-
mize vehicle safety, reliability, and resale value by
minimizing breakdowns resulting from wear, and
minimizing cost and inconvenience by comput-
ing maintenance intervals based upon the spe-
cific manner in which each individual vehicle is
driven.
Maintenance intervals on motor vehicles have
conventionally been specified based upon
accumulated mileage. However, the type of
driving conditions has a major influence on
routine maintenance requirements; distance
traveled is only one of the significant factors.
A vehicle driven for 50,000 miles of short trips
in the city with numerous cold starts, pro-
longed periods of idling, stop-and-go driving,
and high engine speeds during acceleration
requires more frequent maintenance intervals
than a vehicle driven for 50,000 miles for long
distances at low engine speeds primarily at
operating temperature.
The advanced technologies at BMW have led to
the development of the unique BMW service
interval indicator which computes the actual opti-
mum maintenance requirements based not only
upon the accumulated mileage, but taking into
account important factors such as engine cool-
ant temperatures, high or low engine speeds,
short or long trip driving, and number of vehicle
starts. The maintenance interval may therefore
be maximized with considerable savings to own-
ers of vehicles subjected to light duty.
TheService Interval Indicatorconsists of a
mileage reading, and the inscriptions “OIL SER-
VICE” and “INSPECTION”.
Whenever the ignition is switched on, the display
shows the next scheduled type of service and the
remaining distance until the service should be
performed. The distance is based on your driving
style.If the maintenance interval has been exceeded, a
“--” symbol reminds you of the urgent need for
servicing. In the interests of road safety and reli-
ability,you should avoid driving your BMW
when the “--” symbol is showing,and have the
essential maintenance work performed without
delay.
After each maintenance is performed the service
indicator is reset in order to compute the next
service interval.
If the Service Interval Indicator displays an illogi-
cal reading, or if there is no display, consult a
BMW center.
If the speedometer, tachometer or coolant tem-
perature gauge should develop a fault, the ser-
vice interval indicator will probably cease to
operate correctly as well, since it depends on
correct speed, distance and temperature read-
ings. The fault must be located and rectified by a
BMW center.
A detailed list of all maintenance operations
included in each of the elements of the BMW
Maintenance System is found on pages4-13.
These elements are as follows:
Quality Certification I will be performed by your
selling center and certified on the following page.
The performance of certain subsequent mainte-
nance elements, as required by the BMW New
Vehicle Limited Warranty, will be specified at
intervals computed by the BMW service interval
indicator as follows:
– Oil Service: Engine oil changed with the engine
at operating temperature.
Note: change oil at least once a year.
Your BMW is factory-equipped with a newly-
developed synthetic engine oil. At the time of
the printing of this booklet BMW High-Perfor-
mance Synthetic 5W-30 Oil (Part Number 07
51 0 017 866) and Mobil 1 5W-30 and 5W-40
oils are strongly recommended and approved
by BMW for the BMW Z4 models. BMW is eval-
uating various synthetic oils for inclusion in our
list of recommended motor oils.
BMW recommends that you check engine oil
level whenever fuel is added to your vehicle.
2

Engine Oil Service
Engine Compartment
Z4 Roadster 3.0i,
3.0si
Coupe 3.0si
Change oil and oil filter while engine is at normal operating temperature. We
recommend BMW 5W-30 High Performance Synthetic Oil, p/n 07 51 0 017 866.•
Reset service interval indicator.•
Replace microfilter.•
Check overall thickness of front and rear disc brake pads using special tool. If
replacement is necessary: Examine brake disc surfaces. Clean brake pad contact
points in calipers. Grease wheel centering hubs. Check thickness of parking brake
linings only when replacing rear pads•
Check parking brake actuation. Adjust if necessary.•
5

Inspection I
Only those items of inspection work which apply to your vehicle will be performed. This list is subject to
amendment.
Undercarriage
Z4 Roadster 3.0i,
3.0si
Coupe 3.0si
Change oil and oil filter while engine is at normal operating temperature. We
recommend BMW 5W-30 High Performance Synthetic Oil, p/n 07 51 0 017 866.•
Check transmission for leaks.•
Check rear axle for leaks.•
Half-shafts: Check for leaks at flexible boots.•
Visually check fuel tank, lines and connections for leaks.•
Check condition, position, and mounting of exhaust system. Examine for leaks.•
Check steering for absence of play, condition of suspension track rods, front axle
joints, steering linkage and joint disc.•
Check overall thickness of front and rear disc brake pads using special tool. If
replacement is necessary: Examine brake disc surfaces. Clean brake pad contact
points in calipers. Grease wheel centering hubs. Check thickness of parking brake
linings only when replacing rear brake pads. Check brake system connections and
lines for leaks, damage and incorrect positioning.•
Check parking brake actuation. Adjust if necessary.•
Check all tire pressures. Correct if necessary. Check condition of tires (outer
surface [left/right]), tread wear and pattern; in case of uneven tread wear, readjust
wheel alignment if requested (invoice separately).•
Inspect entire body according to terms of rust performation limited warranty. (Must
be performed at least every two years).•
Engine Compartment
Read out diagnostic system.•
Check engine cooling system/heater hose connections for leaks. Check coolant
level and antifreeze protection level. Add coolant if required.•
Check windshield washer fluid level and antifreeze protection. Fill up and/or
correct if required.•
Check air conditioner for operation.•
Replace microfilter (Note: reduce replacement interval in dusty operating
conditions).•
Reset service interval indicator.•
Check brake fluid level. Add fluid if needed•
6

Emission Control Maintenance Schedule BMW Z4 Roadster 3.0i, 3.0si
and Coupe 3.0si
The maintenance schedule as shown is required
for the proper functioning of the emission control
systems for optimum vehicle performance and
fuel economy.
Abbreviations:
I - Inspect
R - Replace part(s) and/or fluid listed
Basic Engine
Engine oil.........................
Engine oil filter.....................
Fuel System
Air filter..........................
Ignition System
Spark plugs.......................
Emission Control Components
Oxygen sensor.....................
BMW Z4 Roadster
3.0i/3.0si
Coupe 3.0si
Oil Service
Inspection I
Oil Service
Inspection II
R
RR
RR
RR
R
R
Replace at intervals of
100,000 miles
Replace at intervals of
120,000 miles
Oxygen Sensor Service: The oxygen sensor deteriorates strictly on a mileage basis and must therefore
be replaced to maximize vehicle fuel economy and minimize exhaust pollution.
The mileage interval varies according to individual driving conditions and is determined by the service
interval indicator.
13